| |
Parameters/model |
UV machine NJUV-45LED-20/2-A |
| 1 |
Equipment component |
Control part, LEDUV light source, fixed bracket and adjusting fixture, matching assembly line synchronization |
| 2 |
External size of main engine |
L 2000mm* W ~850mm*~ H 1750nm (except the height of the tricolored lamp) |
| 3 |
Working power supply |
Three phase five wire 380VAC 50Hz |
| 4 |
Conveyor belt width |
450 mm |
| 5 |
Conveyor belt material |
Black anti-static power belt |
| 6 |
Drive beam aluminum profile |
40 * 80 * 2.0 mm aluminum |
| 7 |
LEDUV surface light source power * quantity |
3KW (irradiation area L420mm*W150mm) *2 sets |
| 8 |
Installation method of LEDUV surface light source |
The lamp set is installed in the direction perpendicular to the assembly line, and the height can be precisely adjusted |
| 9 |
LEDUV source UV lamp power |
3.3 w/PCS |
| 10 |
UV main peak wavelength |
Main UVA 365 nm |
| 11 |
Speed adjustment range of conveyor belt |
0.5 ~ 5 m/min is adjustable |
| 12 |
Effective irradiation width |
420 mm |
| 13 |
Effective length of single LED cold light source |
L420mm |
| 14 |
Effective illumination width of single group LED cold light source |
W150mm |
| 15 |
Operating surface to ground level |
850 + 25 mm |
| 16 |
Feed port with sensor |
Online control with the host, when the sensor module when the LED light on, design light on the waiting time, intelligent control on and off |
| 17 |
The LED light is at the height of the conveyor belt |
3 cm or more |
| 18 |
Adjust the LED light distance from the product height |
10 ~ 30 mm |
| 19 |
Face light source bracket adjustment inlet and outlet height adjustment |
5 ~ 50 (mm) |
| 20 |
UV energy deviation (transmission width direction) |
15% or less |
| 21 |
Surface temperature of conveyor belt |
≤50ºC (when the conveying speed is 2m/min) |
| 22 |
Cooling way |
Forced air cooling |
| 23 |
Heat dissipation and air exhaust capacity |
≤750m3/h diameter of external exhaust outlet 150mm |
| 24 |
UV light energy requirements |
0 ~ 4000mj/cm, (measured at delivery speed of 3m/min |
| 25 |
LED UV lamp service life |
> 10000 hour low attenuation rate :(10000 hour attenuation rate < 20%) |
| 26 |
LED monitoring device |
Supporting LED light switch monitoring function, lamp series circuit breaking and over - temperature check function |
| 27 |
Total equipment power |
10 kw |
| 28 |
Equipment appearance color |
Computer white (color board can be made according to the requirements of tianma company) |
| 29 |
Equipment noise |
Test noise ≤60db from 1 meter away from the equipment. Equipment with two sets of light sources is required to test noise ≤80db in the working area reserved in the middle |
| 30 |
Equipment ground resistance |
5 or less Ω |
| 31 |
Safety tips |
Warning labels should be posted on all dangerous parts. The equipment should be able to prevent UV radiation and electromagnetic radiation from causing harm to human body. The equipment is equipped with emergency stop button and abnormal alarm function. |
